LED First Aid

Power supplyPSU
RGBRGB WhiteW
Pixel controllerPIX

Nothing connected yet

Use Connect in the header for the power supply, the light controllers or the pixel controller. Each panel appears once its device is connected.

Power supply

--.--
volts
-.---
amps
--.-
watts
Set --.-- V--
Current draw-.--- A
No data
Power draw--.- W
No data
A Supply reports -.--- A
Available power-- W
Load --
Not connected

Light

Pick color
Output

Solo a channel at full to read its current draw

Measure draw per color and work out watts and amps per meter

Test pattern

Step time

Pixel controller

Not connected

Color
White0

Test mode

--
°C
--
volts
--
fps out

Live statistics appear once connected.

All statistics

Pixel type

Connect to read the controller's pixel settings.

Apply is temporary until saved. Both need the admin account.

Light controllers

RGB controllernot connected
White controllernot connected

Count pixels

Finds the exact length of a run on one output: hundreds, then tens, then single pixels. Red is not reached yet, blue is the probe, green is counted.

Characterize LED tape

Set the supply voltage and switch the output on first. Each color is driven to full in turn while the draw is averaged over several readings.

Log